Replacement battery for Sony Dualshock 3, Wireless Controller, CECHZC2E

Product Information

AC Adapter: Featuring two cables and the adapter itself, this is a simple way to charge a PS3 controller but remember that older models may not work with such a device. One cable is then plugged into the adapter and wall. The other cord is responsible for connecting your adapter to your controller. Everything is charged with a wall outlet. If you're not about that wired business, and followed all the Bluetooth installation steps above, you should be able to simply unplug the controller, and after a couple seconds it will sync via Bluetooth. You'll get a notification in the system tray when it does. Cool! You can also use your desktop PC, laptop, or Raspberry Pi to charge your PS3 controller. The process is similar to using the PS3 or PS4 console to charge the controller.

Get a mobile mini-B USB cable and a PS3 AC Adaptor. The cable should be able to plug into the PS3 controller. As a temporary solution I removed the battery and even though its a little higher voltage than it should be I soldered a wire from the usb power to the battery terminal to directly power the controller. The accessory will bridge the gap between the controller’s charging port and your device. Conclusion

But what about taking care of the console? There’s not much to it, including the matter of how to charge your PS3 controller. Let’s break down everything you need to keep in mind, as well as any questions you might have. Using a script or add-on that scans GameFAQs for box and screen images (such as an emulator front-end), while overloading our search engine Verify that your PS3 console is powered ON; If it is ON, power on your PS3 controller. To do so, press the circular button with the PS log on it – a red light will appear at the front of the controller, signifying that it’s on and charging. At this point, you should see a light blinking on the controller. This means the controller is now charging.

If you’re experiencing four red blinking lights while attempting a charge, have the connection reset. The controller or battery may need replacement at this point. My PlayStation 3 controller will not charge its internal battery anymore, the battery is fine and it works plugged in except if the vibration motors gets set off it will then draw too much current and the controller shuts off. If I externally charge the battery it works correctly till the battery runs out. These are the main methods you can use to charge your PS3 controller. Hopefully, you can use them without issues. ReferenceYou can also use a phone charger, but you will need extra accessories, such as a PS3 AC Adaptor, to make it work. This works after a reboot, too. If you allow ScpToolkit to start with Windows, you should simply be able to plug in your PS3 controller again and it'll instantly be recognized. Once the LED is on, unplug the controller, and it'll once again be synced via Bluetooth. Press the power button to power your computer. Once your computer powers on, your PS3 controller will start to charge immediately. You should see the LED light up on your controller, indicating it is charging. – Handmade Stations Released in most major markets in November of 2006, the PlayStation 3 had lofty ambitions. Fair enough, as the previous 2 consoles from Sony had dominated the market and changed the industry forever. While the PS3 ultimately failed to sell as many units as its predecessors, it nonetheless moved a very impressive 87.4 million systems. Grand Theft Auto IV, Arkham City, LittleBigPlanet, and Uncharted 2: Among Thieves were just a few of the heavyweight titles released for the system in its lifespan. Find the controller’s charger cable, usually a USB cable. This is the cable that your PS3 ships with. For the standard PS3, the cable has one large end, i.e., the USB plug, and a small end that plugs into the PS3 controller.

Get a piece of wood, make two sections to hold your controller , and smooth the surfaces. Create holes for micro-USB and cables.

21 Answers

You may also simply need to replace the battery or the controller itself. It’s a good thing then that the PlayStation 3 remains as popular as it does and you should be able to secure either of these items easily enough. As we mentioned before, a blinking controller while plugged into a charging source is a normal occurrence. When the controller has finished charging, it will either turn a solid color of white or red, or it will stop blinking altogether. Insert the USB end of your controller’s charger into a USB port on the controller. These ports are on the front of the PS3 – the USB should slide into the port without issues. To restore battery function I plan to add a a Module like this to replace the circuitry in the controller that dose not work, pull power from 5v+ usb to the Modules power input then connect the Modules output to the battery in then the Modules ground to ground and that should work. Your PC: Regardless of the specific computer you own, it really should just come down to plugging one end of the mini USB cable into the computer. The other end will then go into your controller. It doesn’t get much simpler than that.

You can create DIY PS3 controller chargers for your system. This process will need an understanding of handcrafts. That covers the basics of charging your PS3 controller. As you can see, there are several straightforward options available to you. Some PS3 controllers do not have a solid color when fully charged. The blinking light simply stops. Therefore, you may find that the controller cannot charge when you plug it into a standard wall charger. So, why is the PS3 controller not charging ? The main reason it does not charge is the mismatch between the makeup of the chargers. With your USB cable in hand, plug the smaller end into your PS3 controller, before plugging the other USB plug on the other end of the cable into your system.Charging the controller will take approximately one hour. When the controller is fully charged, it will stop flashing, and turn either a solid red or solid white.