The bulb should then be ready to add automatically once again via the app. But if it’s having trouble finding it, make a note of the serial number printed on the bulb and enter it manually by going to “Light setup” then “Add light” and finally “Add serial number”. If you are facing any issues with your Aisirer smart bulb not responding to your commands, it could be due to the following reasons: Many routers have 5 GHz and 2.4 GHz networks and most times your phone and smart device will always automatically connect to the 5 GHz network. So, you have to completely turn off your 5 GHz network. If the bulb is ready to pair, it will be flashing. However, if the light is not flashing to show that it is ready to pair or connect, your device won’t connect to Wi-Fi. If the connection works properly but your device can’t find the network, you may need to upgrade your router or add an extender to increase its range and connectivity.

Bulbs WiFi Smart Bulb B22 Bayonet, Colour Alexa Light Bulbs WiFi Smart Bulb B22 Bayonet, Colour

Dimmable Bright Light & Energy Saving】The light brightness can be fixed percentages from 1% - 100% output, you can set many different scenarios like 'Reading Light' 'Soft Light' 'sleeping Light' etc. Our Smart light bulb using LED rather than incandescent bulbs. It is less energy, produces less heat, good for saving energy. Usually, this removes all bugs, settings, and other problems you might not have noticed. To reset your Aisirer smart bulb; Be sure that you are using a 2.4 GHz Wi-Fi network when connecting the smart bulb to Wi-Fi. Also, ensure that your home network is on a detectable status. The correct app to use is the Smart Life app, which is available on your Android or IOS app store. During the setup, make sure the Bluetooth is on to ensure that your Smart bulb finds the Wi-Fi network seamlessly.Now, try to connect to Wi-Fi and see if these fix the problem else, continue the next troubleshooting tip. 2. Ensure You Have the Right App So, try these troubleshooting tips if you are having a hard time getting your Aisirer Smart Bulb Won’t Connect to Wi-Fi: 1. Ensure the Bulb is in Pairing Mode Millions of Colors】Express yourself and make your space more colorful with AISIRER Smart Light Bulbs. Choose from 16 million colors and soft white to instantly change the look and atmosphere of your room. Control with your smartphone remotely or voice commands and create customized scenes and really unleash your creativity. Perfect light for parties, reading, and all-around leisure activities. The Smart Bulb must be ready to pair before it can successfully connect to Wi-Fi. So, before the Wi-Fi connection setup, ensure the bulb is ready to pair. The official instructions for resetting a Belkin WeMo smart bulb are a bit more detailed, but ultimately boil down to the same steps. Belkin suggests that you turn on the bulb, then switch it off for a second, before turning it on for 3-4 seconds, repeating the process three times.

AISIRER

If you have a Philips Hue Bridge, you can also perform a full factory reset on the hardware by flipping it over and pressing the clearly marked pin-hole button above the serial number. Just remember that this will cause your automated lighting hardware to forget every light on your system, and not just the bulb that’s acting up, so proceed with caution. Turn the bulb off and wait for a few seconds now, turn the bulb on and off three times in a row, and wait for the bulb to blink. The bulb may not be connected to the Wi-Fi network. Make sure that both your bulb and smartphone are connected to the same 2.4GHz Wi-Fi network with a strong and stable signal. During the initial setup, make sure that your smart bulb and router are very close and there is no object obstructing them. Also, ensure that your mobile device is close by too as this helps the bulb connect to Wi-Fi faster without interference. For recent Lifx bulbs, the process is identical: simply turn your smart bulb on and off five times until it flashes to inform you that it’s complete.Dimmable Brightness Light & Energy Saving】Our smart light bulb uses LED technology to give you 7W of power, the equivalent to 60W traditional incandescent bulbs. Brightness can be adjusted from 1% up to 100%, saving up to 80% in energy and lasting up to 30,000 hours. Can These Be Controlled Through the Alexa Feature on a “Blast” Speaker or Is an Echo Specifically Needed? But the clever tech means they occasionally need troubleshooting, too. While most smart bulb bugs come down to Wi-Fi issues, occasionally only a factory reset will fix the issue. Sure, it’s a shame that we occasionally need to debug something as simple as one of the best smart light bulbs, but that’s the price we pay for convenience and the ability to make the room turn any color we choose. Make sure your phone and your bulb are connected to the same 2.4GHz Wi-Fi network. Also, ensure that the network signal is strong and stable.

AISIRER Alexa Smart Bulb WiFi Light Bulbs B22 Bayonet, 2 Pack

Verify that your router is compatible with your bulb. Your router should support 802.11b/g/n protocols and have a WPA/WPA2 encryption mode. Yes, these can be controlled through the Alexa feature on a “Blast” speaker or any other device that has Alexa built-in. You do not need an echo specifically to control these lights. However, you need to enable the Smart Life skill on your Alexa app and link it with your Smart Life account. Then, you can use voice commands to control your lights, such as “Alexa, turn on the living room light” or “Alexa, set the bedroom light to blue”. Why Is My Smart Light Bulb Not Working? Remote And Group Control】Keep this smart light bulb connected with your home 2.4Ghz Wifi network (5Ghz not current supported). You can control this smart light bulb remotely on your smartphone to make it appear as though there are people in the house when you leave home via schedules and timers. Group control functions allows you to control more than one smart light bulb at the same time with the same commands. No, these lights do not overheat if they are left on for too long. These lights are made of high-quality materials and have a low power consumption of 9 watts. They also have a long lifespan of up to 30,000 hours and good heat dissipation performance. However, it is recommended that you turn off the lights when you are not using them to save energy and extend their life. Can These Be Controlled Through the Alexa Feature on a “Blast” Speaker or Is an Echo Specifically Needed?Remote And Group Control】Keep connecting this wifi smart bulb with your home network(only supports 2.4GHz Wifi), you can remotely control it on your smartphone or tablet to simulate someone being at home when you are away. Group control function allows you to control more than one bulb at the same time for scene-setting. If your router is overloaded or has too many devices connected to it, try reducing the number of devices connected to your router. Alternatively, use a different channel or frequency band for your bulb. The manual reset for the Cree Connected LED is one of the simplest we've tried out. Turn the bulb off for 2 seconds, then on for 2 seconds. Repeat three more times. After the fourth cycle, the bulb will flash, indicating that the reset was successful. GE Link LEDs